mask:             0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 18116 entries in 36 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (6649.99 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  5992.000 MB/sec
xor: using function: pIII_sse (5992.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xd0100000-0xd017ffff]
pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xd0200000-0xd023ffff]
pci 0000:00:02.1: reg 10: [mem 0xd0180000-0xd01fffff]
pci 0000:00:1b.0: reg 10: [mem 0xd0240000-0xd0243fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xd0444000-0xd04443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
pci 0000:00:1f.2: reg 10: [io  0x18d0-0x18d7]
pci 0000:00:1f.2: reg 14: [io  0x18c4-0x18c7]
pci 0000:00:1f.2: reg 18: [io  0x18c8-0x18cf]
pci 0000:00:1f.2: reg 1c: [io  0x18c0-0x18c3]
pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
pci 0000:00:1f.2: reg 24: [mem 0xd0444400-0xd04447ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
pci 0000:02:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit]
pci 0000:02:00.0: reg 18: [io  0x2000-0x20ff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xc8000000-0xc9ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xca000000-0xcbffffff]
pci 0000:00:1c.1:   bridge window [mem 0xc2000000-0xc3ffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xcc000000-0xcc000fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.2:   bridge window [mem 0xc4000000-0xc5ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-09]
pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.3:   bridge window [mem 0xce000000-0xcfffffff]
pci 0000:00:1c.3:   bridge window [mem 0xc6000000-0xc7ffffff 64bit pref]
pci 0000:0a:03.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:0a:03.0: supports D1 D2
pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:03.0: PME# disabled
pci 0000:0a:03.1: reg 10: [mem 0xd0005000-0xd00057ff]
pci 0000:0a:03.1: reg 14: [mem 0xd0000000-0xd0003fff]
pci 0000:0a:03.1: supports D1 D2
pci 0000:0a:03.1: PME# supported from D0 D1 D2 D3hot
pci 0000:0a:03.1: PME# disabled
pci 0000:0a:03.2: reg 10: [mem 0xd0004000-0xd0004fff]
pci 0000:0a:03.2: supports D1 D2
pci 0000:0a:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:0a:03.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0a-0b] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
pci_bus 0000:0b: [bus 0b-0e] partially hidden behind transparent bridge 0000:0a [bus 0a-0b]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    644 MB/s
raid6: int32x2    582 MB/s
raid6: int32x4    492 MB/s
raid6: int32x8    406 MB/s
raid6: mmxx1     2097 MB/s
raid6: mmxx2     2441 MB/s
raid6: sse1x1    1277 MB/s
raid6: sse1x2    1765 MB/s
raid6: sse2x1    2460 MB/s
raid6: sse2x2    2707 MB/s
raid6: using algorithm sse2x2 (2707 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [io  0x0680-0x06ff] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0x1000-0x107f] has been reserved
system 00:05: [io  0x1180-0x11bf] has been reserved
system 00:05: [io  0x1640-0x164f] has been reserved
system 00:05: [io  0xfe00-0xfe7f] has been reserved
system 00:05: [io  0xfe80-0xfeff] has been reserved
pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1e.0: BAR 7: assigned [io  0x6000-0x6fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xc8000000-0xc9ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xca000000-0xcbffffff]
pci 0000:00:1c.1:   bridge window [mem 0xc2000000-0xc3ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.2:   bridge window [mem 0xc4000000-0xc5ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-09]
pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.3:   bridge window [mem 0xce000000-0xcfffffff]
pci 0000:00:1c.3:   bridge window [mem 0xc6000000-0xc7ffffff 64bit pref]
pci 0000:0a:03.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:0a:03.0: BAR 10: assigned [mem 0x84000000-0x87ffffff]
pci 0000:0a:03.0: BAR 0: assigned [mem 0xd0006000-0xd0006fff]
pci 0000:0a:03.0: BAR 0: set to [mem 0xd0006000-0xd0006fff] (PCI address [0xd0006000-0xd0006fff]
pci 0000:0a:03.0: BAR 7: assigned [io  0x6000-0x60ff]
pci 0000:0a:03.0: BAR 8: assigned [io  0x6400-0x64ff]
pci 0000:0a:03.0: CardBus bridge to [bus 0b-0e]
pci 0000:0a:03.0:   bridge window [io  0x6000-0x60ff]
pci 0000:0a:03.0:   bridge window [io  0x6400-0x64ff]
pci 0000:0a:03.0:   bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:0a:03.0:   bridge window [mem 0x84000000-0x87ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0b]
pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0004 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:0a:03.0: enabling device (0000 -> 0003)
pci 0000:0a:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc8000000-0xc9ffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xca000000-0xcbffffff]
pci_bus 0000:04: resource 2 [mem 0xc2000000-0xc3ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xcc000000-0xcdffffff]
pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc5ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:08: resource 1 [mem 0xce000000-0xcfffffff]
pci_bus 0000:08: resource 2 [mem 0xc6000000-0xc7ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:0a: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:0a: resource 3 [io  0x0000-0xffff]
pci_bus 0000:0a: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:0b: resource 0 [io  0x6000-0x60ff]
pci_bus 0000:0b: resource 1 [io  0x6400-0x64ff]
pci_bus 0000:0b: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:0b: resource 3 [mem 0x84000000-0x87ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2578k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1274258792.504:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 1719
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Loading iSCSI transport class v2.0-870.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ata1.00: ATAPI: PIONEER DVD-RW  DVR-K16M, 1.10, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-K16M 1.10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ata3.00: ATA-8: WDC WD2500BEVS-00UST0, 01.01A01, max UDMA/133
ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-0 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
 sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
registered taskstats version 1
Freeing unused kernel memory: 484k freed
Write protecting the kernel text: 4072k
Write protecting the kernel read-only data: 1292k
EXT4-fs (dm-1): mounted filesystem with ordered data mode
udev: starting version 153
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0444000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.4-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
tifm_7xx1 0000:0a:03.2: enabling device (0000 -> 0002)
tifm_7xx1 0000:0a:03.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
sky2 driver version 1.26
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 FE chip revision 1
sky2 0000:02:00.0: irq 28 for MSI/MSI-X
sky2 eth0: addr 00:13:a9:60:9f:64
ACPI: Invalid active0 threshold
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (57 C)
ACPI: Invalid active0 threshold
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (57 C)
intel_rng: FWH not detected
Linux agpgart interface v0.103
ACPI: SSDT 7f691eb5 001C2 (v01   SONY       J4 20060916 PTL  20050624)
ACPI: SSDT 7f691c5e 001D2 (v01   SONY       J4 20060916 PTL  20050624)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ACPI: SSDT 7f692077 00094 (v01   SONY       J4 20060916 PTL  20050624)
ACPI: SSDT 7f691e30 00085 (v01   SONY       J4 20060916 PTL  20050624)
ohci1394 0000:0a:03.1: enabling device (0000 -> 0002)
ohci1394 0000:0a:03.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sony-laptop: Sony Notebook Control Driver v0.6.
leds_ss4200: no LED devices found
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[d0005000-d00057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
yenta_cardbus 0000:0a:03.0: CardBus bridge found [104d:820f]
yenta_cardbus 0000:0a:03.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:0a:03.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:0a:03.0: TI: mfunc 0x01121b22, devctl 0x64
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:26/SNY5001:00/input/input5
input: Sony Vaio Jogdial as /devices/virtual/input/input6
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[drm] Initialized drm 1.1.0 20060810
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
yenta_cardbus 0000:0a:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:0a:03.0: Socket status: 30000006
pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: clean.
yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input7
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33.4-smp-ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwl3945 0000:06:00.0: setting latency timer to 64
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 7M of stolen space
iwl3945 0000:06:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:06:00.0: irq 30 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
[drm] initialized overlay support
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[08004603023b1324]
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Adding 524280k swap on /dev/mapper/cryptvg-swap.  Priority:-1 extents:1 across:524280k 
fuse init (API version 7.13)
------------[ cut here ]------------
WARNING: at mm/page_alloc.c:1813 __alloc_pages_nodemask+0x4c6/0x5a0()
Hardware name: VGN-C140G
Modules linked in: fuse snd_hda_codec_realtek iwl3945 iwlcore i915 snd_hda_intel mac80211 pcmcia snd_hda_codec drm_kms_helper cfg80211 snd_hwdep drm intel_agp snd_pcm yenta_socket led_class sony_laptop snd_timer ohci1394 i2c_algo_bit snd rfkill processor agpgart rsrc_nonstatic video ac thermal battery sky2 pcmcia_core button tifm_7xx1 rtc_cmos thermal_sys ieee1394 uhci_hcd i2c_i801 soundcore hwmon tifm_core output rtc_core psmouse ehci_hcd snd_page_alloc i2c_core rtc_lib sg serio_raw evdev ext4 mbcache jbd2
Pid: 1281, comm: mount Not tainted 2.6.33.4-smp #1
Call Trace:
 [<c103d172>] warn_slowpath_common+0x72/0xa0
 [<c10b4ef6>] ? __alloc_pages_nodemask+0x4c6/0x5a0
 [<c10b4ef6>] ? __alloc_pages_nodemask+0x4c6/0x5a0
 [<c103d1ba>] warn_slowpath_null+0x1a/0x20
 [<c10b4ef6>] __alloc_pages_nodemask+0x4c6/0x5a0
 [<c1019f7b>] ? lapic_next_event+0x1b/0x20
 [<c10667ab>] ? clockevents_program_event+0x8b/0x140
 [<c104be67>] ? run_timer_softirq+0x37/0x2a0
 [<c10673b2>] ? tick_handle_oneshot_broadcast+0xf2/0x130
 [<c10b4fec>] __get_free_pages+0x1c/0x30
 [<c10db2a4>] __kmalloc+0x134/0x160
 [<c1005b2d>] ? timer_interrupt+0x3d/0x50
 [<c108500c>] ? handle_IRQ_event+0x4c/0x140
 [<c11cd628>] match_number+0x28/0x90
 [<c11cd6ba>] match_int+0xa/0x10
 [<f7cf5d1a>] parse_options+0x15a/0x800 [ext4]
 [<c10438e9>] ? irq_exit+0x39/0x70
 [<c13f8525>] ? do_IRQ+0x55/0xc0
 [<c13f7b55>] ? _lock_kernel+0x35/0x93
 [<c13f6729>] ? mutex_lock+0x19/0x40
 [<f7cf6b19>] ext4_remount+0xd9/0x480 [ext4]
 [<c10f02b1>] ? d_free+0x31/0x50
 [<f7cf6a40>] ? ext4_remount+0x0/0x480 [ext4]
 [<c10e1713>] do_remount_sb+0x73/0x160
 [<c10f86e9>] do_mount+0x549/0x720
 [<c10f66d8>] ? copy_mount_options+0xa8/0x110
 [<c10f892b>] sys_mount+0x6b/0xa0
 [<c13f7c34>] syscall_call+0x7/0xb
---[ end trace 561326103a868b30 ]---
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
EXT4-fs (dm-3): mounted filesystem with ordered data mode
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=059f, idProduct=1010
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1: Product: LaCie Desktop Hard Drive
usb 1-1: Manufacturer: LaCie
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: Direct-Access     ST350082 0AS                   PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2 sdb3
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (dm-5): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (dm-5): mounted filesystem with ordered data mode
EXT4-fs (dm-4): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (dm-4): mounted filesystem with ordered data mode
CE: hpet increasing min_delta_ns to 15000 nsec
usb 1-1: USB disconnect, address 2
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present